Skip to main content
Fluid Controls

Company

Where customer problems become qualified products

Fluid Controls’ R&D centre and testing laboratory sit inside the Pune manufacturing facility, so a customer problem becomes a qualified product on one site rather than across a supply chain.

45

Design engineers, headed by a PhD from IIT Bombay

10,000 sq ft

R&D centre at Chakan, Pune. A DSIR-recognised in-house unit

2 + 2

Patents. Two published, two filings in process

58,000 psi

Hydrostatic ceiling in the NABL-accredited test laboratory

Our Research & Development

Fluid Controls offers clients customised solutions based on analytical formulations, 2D and 3D modelling and Finite Element Analysis. Our commitment to product upgradation and new product development has resulted in the recognition of Fluid Controls as an “In-House R&D Centre” by the Department of Scientific & Industrial Research (DSIR). We have developed over 25 new products in recent years and hold two published patents, with two more filings in process.

The R&D centre

A DSIR-recognised in-house R&D unit at Chakan, 10,000 sq ft of it, staffed by 45 qualified design engineers and headed by Dr Tansen Chaudhari, PhD in Mechanical Engineering from IIT Bombay. The team works to a Design for Six Sigma framework on SolidWorks, Ansys, AutoCAD, HyperMesh and PDMS. From analytical formulation through finite element analysis to prototypes cut on our own CNC machines.

Our Intellectual Property

WO2020170264

Method of heat treating an article, published as WO2020170264 on 27 August 2020 from international application PCT/IN2019/050294, filed 10 April 2019 and classified under IPC C23C 8/38, C23C 8/22 and C21D 1/74. Inventors: Tansen Dhananjay Chaudhari and Rahul Manikrao Patil. Two further filings are in process.

The paper behind it

Our Intellectual Property

Product Development Process

  1. Step 01

    Analytical Formulations

    Using the basic laws of physics and hydraulics, we use analytical formulas, wherever applicable, for a basic design formulation. This helps us design the product to the required performance.

  2. Step 02

    3D & 2D Modelling

    After our calculations, we create options through Solid Models via 2D and 3D design packages which resolve physical conflicts and fine-tune the product geometry.

  3. Step 03

    Finite Element Modelling & Analysis

    The developed design is validated virtually using Finite Element Analysis (FEA). The solid model is first meshed, applied with a suitable material model, and then loaded and constrained to represent service conditions.

  4. Step 04

    Manufacturing

    Once the virtual validation is complete, the models are then validated by our manufacturing experts, after which manufacturing drawings are prepared.

  5. Step 05

    Final Testing

    With our belief that "seeing is believing", the manufactured product is then taken to our testing center. A range of performance tests are conducted to validate performance parameters. Once the testing is successful, the newly designed product is released.

Developed here

14
  • Single ferrule bite connectors
  • Single ferrule compression connectors
  • O-ring face seal connectors
  • Spherical / flanged sleeve compression connectors
  • 60° cone connectors
  • 24° weld nipples
  • 37° flared JIC connectors
  • 45° flared JIC connectors
  • DIN swivel connectors
  • Across-frame connectors
  • Flexigrip connectors
  • Quick disconnect couplings
  • Hose connectors
  • Isolating valves for railway piping

Testing and metrology

NABL Accredited Test Laboratory | ISO/IEC 17025:2017 | TC-16263

The R&D centre has in-house performance testing and metrology laboratories for all pressure, vibration and reliability tests. The laboratory has also been used by the defence department for pressure and burst testing of hard bomb shells.

  • Hydrostatic pressure to 58,000 psi
  • Pneumatic testing to 20,000 psi
  • Cryogenic test setup to −196 °C
  • Hydraulic impulse and vibration
  • Temperature cycling
  • Salt spray to ASTM B117, plating to ASTM B840
  • Stress corrosion to ASTM F1387
  • Flexure fatigue, rotary flexure and tensile pull
  • Vacuum test to 750 mbar
  • Non-return valve cracking pressure to 0.5 kg
  • Valve reliability cycle bench
  • SCADA multi-test bench
  • In-house spectro, PMI and ultrasonic testing
  • Rockwell and Vickers hardness, and tensile strength
  • Oxygen-clean facility
  • Product qualification to ASTM F1387-99 (2012), ISO 19879, MSS-SP-99 and API 607

Our quality ethos

Customer delight

Rigorous testing and certification programme

No compromises

Quality

  • Product approvals
  • System certifications
  • Traceability
  • Validation processes
  • Standards of excellence

Recognised outside Fluid Controls

CII Industrial Innovation Awards 2019

Manufacturing, Medium Enterprise.

CII Top 25 Innovative Companies 2021

Confederation of Indian Industry.

CII Top 50 & Top 75 Innovative Companies 2022–2025

Named in four consecutive years.

India 5000 Best MSME Award for Quality Excellence 2020

Rail Solution Provider of the Year 2020

Instrumentation. Rail Infra & Mobility Business Digital Awards.

Excellence in Technical Innovation 2020

ISA Maharashtra Section, at the PPA Meet.

Urban Infra Solutions Provider of the Year 2019

We use essential cookies to run the site and, with your consent, analytics cookies to improve it. See our Privacy policy.