Skip to main content
Fluid Controls

Company

Sustainability

Sustainability at Fluid Controls is certified environmental and safety management, and connections engineered so that what is inside the pipe stays inside the pipe. Certification covers ISO 14001:2015 for environmental management and ISO 45001:2018 for occupational health and safety.

Environmental management

Certified to ISO 14001:2015. Environmental performance is audited through the same integrated management system as product quality, not alongside it.

Occupational health & safety

Certified to ISO 45001:2018, covering our manufacturing operations and the teams that commission systems on customer sites.

Fewer leak paths, for longer

Fire-safe, low-emission valve designs and double-ferrule connections that hold by geometry rather than torque alone. A joint that does not weep is the most direct contribution this product category makes: fugitive emissions are lost product, and they are lost for the life of the plant.

Information security

Certified to ISO/IEC 27001:2022. Customer drawings, specifications and part data are handled under an audited information security management system. The same discipline applied to a design file as to a pressure test.

Anti-bribery and business conduct

Certified to ISO 37001:2016. An independently audited anti-bribery management system governs how business is won and how suppliers are appointed, which is the part of governance a procurement team is answerable for.

Carbon reporting for EU shipments

Goods shipped into the European Union fall under the Carbon Border Adjustment Mechanism, which requires the embedded emissions of the steel in each consignment to be declared. We are set up to report that data with the shipment rather than after it.

Where the engineering does the work

Fugitive emissions are lost product
A weeping joint leaks for the life of the plant. Our valves are tested to ISO 15848-1, the standard that measures how much escapes past the stem and the body seals over thousands of cycles.
Holding by geometry, not by torque
A double-ferrule connection seals because of its shape: the front ferrule seals, the back ferrule grips. It does not depend on an installer reaching an exact torque, which is the assumption that fails first in the field.
Tested to fail safely
Valves are fire-tested to API 607 and ISO 10497: after the seat material has burned away, the valve must still shut off. Containment during a fire is the case where a leak stops being a loss and becomes a hazard.

Certified and tested

Integrated management system
ISO 9001, ISO 14001 and ISO 45001 in one certificate. Quality, environment and occupational safety audited together.
MSME ZED Gold
India's Zero Defect Zero Effect scheme, at its Gold level. Manufacturing assessed for environmental effect as well as defect rate.
Fugitive emission testing
Valve stem and body sealing measured to ISO 15848-1, the standard buyers cite when emissions are part of the specification.
Fire-safe test
API 607 and ISO 10497: the valve is burned, then required to shut off and hold.
ISO/IEC 27001:2022
Information Security Management System
ISO 37001:2016
Anti-Bribery Management System

How the company is run

ISO/IEC 27001:2022
Information Security Management System. Customer drawings, specifications and part data are held under an audited set of controls. The certificate covers how that information is classified, who can reach it, and what happens when something goes wrong.
ISO 37001:2016
Anti-Bribery Management System. The standard an organisation is certified against when it wants its refusal to pay to be auditable rather than asserted. Due diligence on agents and distributors, controls on gifts and hospitality, and a route for reporting.

Energy, water and waste figures, and our current reduction targets, are available to customers and auditors on request.

We use essential cookies to run the site and, with your consent, analytics cookies to improve it. See our Privacy policy.