Product
Rubber Hose EN 853
Steel wire braid hydraulic hose to EN 853 in 1SN, 2SN, 1ST and 2ST types, for medium pressure hydraulic, coolant, water and air lines.
Hoses & Hose Connectors
Rubber Hose EN 853
EN 853 is the workhorse of the rubber hose range: a synthetic rubber core resistant to mineral and vegetable oil based hydraulic fluids, high tensile steel wire braid over it, and a wear resistant synthetic rubber cover.
The 1SN type takes one layer of braid and the 2SN two, both to SAE J517-100R1AT / EN 853-1SN and 2SN / ISO 1436. The 1ST and 2ST types are built to SAE J517-100R1A / EN 853-1ST and 2ST with one and two layers of braid respectively. Working pressure across the four types runs from 10 to 415 bar; the published application band for petroleum and water based fluids is 10 to 250 bar. Continuous service temperature is 40°C to 100°C.
Hoses are quality checked at source and undergo the tests the customer specifies — burst, proof, leakage and impulse — witnessed by Fluid Controls inspectors or by a third party inspector.
- Max working pressure
- up to 10–415 bar
- Body materials
- Synthetic rubber
Features
- One layer of high tensile steel wire braid (1SN, 1ST)
- Two layers of high tensile steel wire braid (2SN, 2ST)
- Synthetic rubber core resistant to mineral and vegetable oil based hydraulic fluids
- Weather and wear resistant synthetic rubber cover
- Continuous service 40°C to 100°C
Applications
- Hydraulic systems
- Coolant lines
- Water and air lines
- Agricultural equipment
- Stationary equipment
- Off-road vehicles
- Size range
- 1/4"–2"
- Max working pressure
- up to 10–415 bar
- Body materials
- Synthetic rubber
- Temperature
- 40 °C to 100 °C (continuous)
- Testing
- Burst, proof, leakage and impulse testing to customer specification, witnessed at source by Fluid Controls or a third party inspector
Synthetic rubber
on requestSupplied with EN 10204 3.1 material certification and heat-code traceability to the melt.
Datasheet
Download the datasheetOne field. The datasheet (or the family catalogue that includes this model) arrives in your inbox immediately.
Send to a colleagueCAD model (STEP)
Designing our part into your assembly? Request the STEP file and we’ll send it when it clears export screening.
Browse the full resource library