Data Centres
Reliable Cooling, Fluid Transfer and Infrastructure Solutions for Data Centres
Qualified toISO 19879
Qualified to:
ISO 19879 · IACS P2.11 · IEC 60068-2-52Type test — single ferrule, 10/22/42 mmASTM F1387-99 (2012)Type test, mandatory and supplementaryPED 2014/68/EUArt. 4(3) SEP — fittingsNABL Accredited Test Laboratory | ISO/IEC 17025:2017 | TC-16263National Accreditation Board for Testing and Calibration Laboratories
Modern data centres depend on reliable cooling and utility infrastructure to ensure uninterrupted operations. Fluid Controls provides engineered assemblies, UQD coupling, fittings, valves, fluid conveyance systems and precision components that support HVAC, liquid cooling, fire protection and critical utility applications.
Our products are designed to deliver operational efficiency, safety and long-term reliability for hyperscale, enterprise and colocation data centre environments.
Applications
- Hyperscale Data Centres
- Enterprise Data Centres
- Colocation Facilities
- Liquid Cooling Infrastructure
- Chilled Water Systems
- HVAC & Utility Networks
- Fire Protection Systems
- Backup Power Infrastructure
- Generator Fuel Systems
- Building Management Systems
- Critical Cooling Distribution Networks
Standards & approvals
- ISO 9001:2015, ISO 14001:2015 & ISO 45001:2018
- NABL-accredited leak, vacuum and pressure testing (ISO/IEC 17025:2017)
- ISO 19879 (impulse and leak testing of metal tube connections)
- ASTM F1387-99 (2012)
- PED 2014/68/EU
- EN 61373 and IEC 60068 vibration and shock
What we supply into Data Centres
99 products across 4 families. Full listing with filters below.
Data Centres products
Every product Fluid Controls supplies into this sector, grouped by product family.
Tube Fittings & Connectors
- O-Seal Male AdapterFluid Controls Double Ferrule O-Seal Male Adapter, OD Tube x Male Straight Thread.
- 45° Male ElbowFluid Controls Double Ferrule Tube Fitting, 45° Male Elbow, Tube OD x Male NPT
- 45° Positionable Male ElbowFluid Controls Double Ferrule Tube Fitting, 45° Positionable Male Elbow, Tube OD x Male Thread.
- Back FerruleThe Fluid Controls Back Ferrule is a key component of a Double-Ferrule tube fitting. It works together with the front ferrule to provide reliable tube gripping and sealing.
- Bulkhead ElbowFluid Controls Double Ferrule Bulkhead Elbow Fitting, Bulkhead Union Elbow, Tube OD x Tube OD
- Bulkhead Female ConnectorFluid Controls Double Ferrule Bulkhead Female Connector, Tube OD x Female Thread
- Bulkhead Male ConnectorFluid Controls Double Ferrule Bulkhead Male Connector, Tube OD x Male Thread
- Bulkhead ReducerFluid Controls Double Ferrule Bulkhead Reducer Fitting, Inch OD Tube x Inch OD Ports
- Bulkhead Reducing UnionFluid Controls Double Ferrule Fitting Bulkhead Reducing Union, Tube OD x Reducing Tube OD.
- Bulkhead UnionFluid Controls Double Ferrule Straight Bulkhead Union Connector, Tube OD x Tube OD
- Butt Weld Pipe ConnectorFluid Controls Double Ferrule Butt Weld Pipe Connector, Tube OD x Pipe.
- Butt Weld Pipe ElbowFluid Controls Double Ferrule Butt Weld Pipe Elbow, Tube OD x Pipe.
- Coupling CapFluid Controls Double Ferrule Coupling Cap
- Female AdapterFluid Controls Double Ferrule Female Adapter, OD Tubes x Female Thread.
- Female Branch TeeFluid Controls Double Ferrule Female Branch Tee, Tube OD x Tube OD x Female Thread.
- Female ConnectorFluid Controls Double Ferrule Female Connector, Tube OD x Female Thread.
- Female ElbowFluid Controls Double Ferrule Female Elbow, Tube OD x Female Thread.
- Female Manometer AdapterFluid Controls Double Ferrule Female Manometer Adapter, OD Tubes x Female Thread.
- Female Manometer ConnectorFluid Controls Double Ferrule Female Manometer Connector, Tube OD x Female Thread.
- Female Run TeeFluid Controls Double Ferrule Female Run Tee, Tube OD x Female Thread x Tube OD.
- Fitting End ClosureFitting End Closure in double-ferrule design for instrumentation tube systems. Available in SS, Brass, and Monel.
- Front FerruleThe Fluid Controls Front Ferrule is a key component of a Double-Ferrule tube fitting. It works together with the Back ferrule to provide reliable tube gripping and sealing.
- Male AdapterFluid Controls Double Ferrule Male Adapter, OD Tube x Male Thread.
- Male Branch TeeFluid Controls Double Ferrule Male Branch Tee, Tube OD x Tube OD x Male Thread.
- Male ConnectorFluid Controls Double Ferrule Male Connector, Tube OD x Male Thread
- Male ElbowFluid Controls Double Ferrule Male Elbow, Tube OD x Male Thread
- Male Run TeeFluid Control Double ferrule Male Run Tee, Tube OD x Male Thread On Run Side x Tube OD
- O-Seal Male ConnectorFluid Controls Double Ferrule O-Seal Male Connector, Tube OD x Male Straight Thread.
- Positionable Branch TeeFluid Controls Double Ferrule Positionable Branch Tee, Tube OD x Tube OD x Male Parallel Thread.
- Positionable Male Branch TeeFluid Controls Double Ferrule Positionable Male Branch Tee, Tube OD x Tube OD x Male Parallel Thread.
- Positionable Male ElbowFluid Controls Double Ferrule Positionable Male Elbow, Tube OD x Male Parallel Thread.
- Positionable Male Run TeeFluid Controls Double Ferrule Positionable Male Run Tee, Tube OD x Male Parallel Thread x Tube OD
- ReducerFluid Controls Double Ferrule Reducer Fitting, Inch OD Tube x Inch OD Ports
- Reducing UnionFluid Controls Double Ferrule Reducing Union Fitting, Tube OD x Reducing Tube OD
- Reducing Union TeeFluid Controls Double Ferrule Reducing Union Tee Fitting, Tube OD x Tube OD x Tube OD
- Socket Weld Tube ConnectorFluid Controls Socket Weld Tube Connector
- Socket Weld Tube ElbowFluid Controls Socket Weld Tube Elbow
- Tube End ClosureFluid Controls Tube End Closure in Double Ferrule Design.
- UnionFluid Controls Double Ferrule Straight Union Connector, Tube OD x Tube OD
- Union CrossFluid Controls Double Ferrule Union Cross, Tube OD x Tube OD x Tube OD x Tube OD.
- Union ElbowFluid Controls Double Ferrule Union Elbow, Tube OD x Tube OD
- Union TeeFluid Controls Double Ferrule Union Tee, Tube OD x Tube OD x Tube OD
- DIN Single Ferrule FittingsFluid Controls Single ferrule instrumentation fittings to DIN standards for hydraulic and railway applications.
- Quick Release ConnectorsQuick-release couplings for rapid connect/disconnect in instrumentation and pneumatic systems.
- FlexiGrip FittingsFlexiGrip fittings are flexible grip connectors for misaligned pipe connections. They are ideal for railway brake piping and vibration-prone installations.
- Swaging Machine & Assembly ToolsSwaging machines and installation accessories for double-ferrule tube fitting assembly.
- Double Ferrule FittingsDouble ferrule instrumentation tube fittings — also called twin ferrule fittings — for leak-tight, reusable connections on instrumentation tubing.
Manifolds
- 4-Valve ManifoldA 4-valve manifold gives two block, one vent and one equalise valve for DP transmitter installations.
- Three-way pressure instrument manifoldThe screwed three-way manifold: female process, gauge and drain ports in one block, in a straight and a right-angle pattern.
- PTM 1Vent valve on top, isolation valve on the side, with the drain / vent port available at 1/4" or 1/2" NPT.
- PTM 2Isolation and vent valves opposed across the block, with the drain taken on the process side.
- PTM 3Isolation and vent valves opposed across the block, with the drain taken on top rather than on the process side.
- PTM 4Both valves brought out on one side with the vent valve angled, for a hook-up with clearance on three faces.
- PTM 5Both valves taken off the top of the block with the drain on the process side, for hook-ups reached from above.
- PTM 6Vent valve on the side, isolation valve angled off the top and the drain brought out in front.
- Two-Valve Direct MountingPTM 6's valve arrangement on a flanged instrument connection, so the transmitter mounts straight onto the manifold.
- Two-Valve T-TypeThe "T" pattern on a flanged instrument connection, with a 1/2" NPT process port and a 1/4" drain.
- Single Isolate / Vent BlockLow-pressure direct-mounting block for level measurement on atmospheric tanks, with a T-bar isolate handle and an anti-tamper vent handle.
- Block & BleedOne-piece block and bleed on an ASA raised-face flange, bolted straight to the vessel or process pipe for primary isolation.
- Two-Valve Coplanar MountingIntegral coplanar manifold built to assemble onto particular transmitter models, with one isolating valve and one vent valve.
- Remote MountingValves on three sides with screwed connections, for mounting a differential pressure instrument away from the manifold on impulse lines.
- Direct Mounting DM 1All three valves on top with screwed process connections, for direct mounting where a straight valve would foul the instrument.
- Direct Mounting DM 2Flanged body with the valves on three sides and a screwed process connection — DM 1's alternative where the handles need separating.
- Three-Valve T-TypeThe "T" pattern with a screwed process connection, landing direct on the instrument.
- H-TypeFlanged on both the instrument and the process side, so it will mount direct or go remote on oval / kidney flanges.
- Three-Valve Coplanar MountingIntegral coplanar manifold for particular transmitter models — two isolating valves, one equaliser and two plugged vent ports.
- Steam ServiceFor power generating equipment on superheated steam, to boiler regulations, with a butt-weld process connection and an M20 drain.
- Four-Valve Direct MountingDouble isolate / vent block for services where the process fluid must not be contaminated, with a tamper-proof vent handle.
- Direct Mounting, EqualiseDouble isolate / equalise / vent block with a common drain, for general liquid and gas differential pressure measurement.
- Remote Mounting 5 RM1Two isolation valves, one equaliser and two drain / vent valves on separate connections, for remote mounting on impulse lines.
- Remote Mounting 5 RM25 RM1's valve set on a COMMON drain connection with the drain brought out in front.
- Remote Mounting 5 RM3The third remote-mounted five-valve block, with separate drain / vent connections on a different body form to 5 RM1.
- Five-Valve Direct MountingVent valves on the side and the rest on top, angled to clear the instrument, with a screwed process connection.
- Five-Valve T-TypeThe "T" pattern five-valve block, screwed on the process side and flanged on the instrument.
- H-TypeFlanged on both sides with the drain port on one side and an optional test port at the bottom — mounts direct or remote.
- Five-Valve Coplanar MountingIntegral coplanar manifold for particular transmitter models — two isolating valves, one equaliser, two vent valves and two plugged bottom test ports.
Hoses & Hose Connectors
- Rubber Hose EN 856Four- and six-spiral steel wire hydraulic hose to EN 856 in 4SP, 4SH, R12 and R13 types, rated 165 to 450 bar.
- Rubber Hose EN 857Compact steel wire braid hydraulic hose to EN 857 in 1SC and 2SC types, rated 88 to 400 bar for narrow installations.
- Rubber Hose SAE J30Single textile reinforced R6 hose to SAE J30, rated 5 bar, for CNG fitted vehicles.
- Corrugated Metallic Hose – Non-BraidedUnbraided annular corrugated stainless steel hose to ISO 10380, 4 to 100 mm, rated 1 to 26 bar for steam, air and high temperature fluids.
- Corrugated Metallic Hose – BraidedBraided annular corrugated stainless steel hose to ISO 10380, 4 to 100 mm, rated 19 to 153 bar for steam, air and high temperature fluids.
- PA HoseLightweight polyamide hose to DIN 73378 and DIN 74324, 1.5 to 14 mm, for pneumatic, hydraulic, fuel and lubrication lines.
- PTFE Hose – UnbraidedSintered PTFE core hose without braiding, 3 to 19 mm, rated 13 to 80 bar for all fluids up to 260°C.
- PTFE Hose – Single Metallic BraidedSintered PTFE core hose with a single 304 stainless steel braid, 3 to 28 mm, rated 44 to 224 bar for all fluids from -54°C to 260°C.
- PTFE Hose – Double Metallic BraidedSintered PTFE core hose with double 304 stainless steel braiding, 3 to 29 mm, rated 60 to 310 bar for all fluids from -54°C to 260°C.
- O-Ring Face Seal Hose ConnectorHose connector terminating in an O-ring face seal end, to ISO 8434-3, SAE J1353, in stainless steel, carbon steel or brass.
- 24° Cone Hose ConnectorHose connector terminating in a 24° cone connector with O-ring and DKO type nut, to ISO 8434-1, DIN 2353, in stainless steel, carbon steel or brass.
- Flanged End Hose ConnectorHose connector terminating in a flanged end, in butt weld and socket weld flange forms, to ISO 6162-1, ISO 6162-2, SAE J518, in stainless steel, carbon steel or brass.
- Metric Stud End Hose ConnectorHose connector terminating in a metric stud end, to ISO 6149, in stainless steel, carbon steel or brass.
- 37° Cone Hose ConnectorHose connector terminating in a 37° cone connector, the JIC pattern, to ISO 8434-2, SAE J514, in stainless steel, carbon steel or brass.
- 60° Cone Hose ConnectorHose connector terminating in a 60° cone connector with O-ring and DKO type nut, to ISO 8434-6, SAE J514, in stainless steel, carbon steel or brass.
- BSPP / BSPT Hose ConnectorHose connector terminating in a BSPP or BSPT threaded end, to ISO 7, ISO 228, in stainless steel, carbon steel or brass.
- NPT / NPTF Hose ConnectorHose connector terminating in an NPT or NPTF threaded end, to ASME B1.20.1, in stainless steel, carbon steel or brass.
- SAE Flange Hose ConnectorHose connector terminating in an SAE flange end, to SAE J518, in stainless steel, carbon steel or brass.
- Metric Hose ConnectorHose connector terminating in a metric threaded end, to BS 3643-1, in stainless steel, carbon steel or brass.
- JIS Cone Hose ConnectorHose connector terminating in a JIS cone connection at 30°, 37°, 45° or 60°, to JIS B2351, JIS B8363, in stainless steel, carbon steel or brass.
- Single Ferrule Hose ConnectorHose connector terminating in a single ferrule compression end, to ISO 8434-1, DIN 2353, in stainless steel, carbon steel or brass.
- Double Ferrule Tube ConnectorHose connector terminating in a double ferrule compression end, to Fluid Controls design, in stainless steel, carbon steel or brass.
Certifications and approvals
Every certificate and report behind what this page says about Data Centres, with its number and its issuing body.
Type test certificate — ISO 19879, IACS P2.11:2001 and IEC 60068-2-52, single ferrule fittings
Det Norske Veritas, report PUN/16/NT/562, 14 October 2016
Type test certificate — ASTM F1387-99 (re-approved 2005 & 2012), mandatory and supplementary tests
Det Norske Veritas, Id. 55024106 — reports PUN/14/AD/169169/FM and /FS, 22 November 2014
Statement of Conformity C563471 Rev. 01 — PED 2014/68/EU Article 4(3), Sound Engineering Practice
DNV Business Assurance India, Rev. 01 of 19 December 2025 — a statement of conformity, not a Notified Body certificate: no CE marking, no Declaration of Conformity
NABL Accredited Test Laboratory | ISO/IEC 17025:2017 | TC-16263 — certificate and scope of testing
National Accreditation Board for Testing and Calibration Laboratories, certificate TC-16263
Hoses & Hose Connectors — in-house crimping and assembly testing
Fluid Controls, product brochure
The reports behind it
7 certificates and witnessed test reports held for this industry, each named with the standard and the scope it covers. Not a list of what the laboratory could run.
| Test or certification | Standard | Scope |
|---|---|---|
| Qualification type test — cyclic endurance, overtightening, impulse with vibration | ISO 19879 · IACS P2.11:2001 | Single ferrule connectors, 10, 22 and 42 mm |
| Salt mist test | IEC 60068-2-52 | Single ferrule connectors |
| Performance type test — incl. thermal cycling, stress corrosion, vibration | ASTM F1387-99 (2012) | Double ferrule fittings, eight sizes, 1/4" to 1" OD |
| Design assessment | ISO 8434-1 · DIN 2353 | DIN single ferrule fittings |
| Laboratory accreditation and scope of testing | ISO/IEC 17025:2017 (TC-16263) | ISO 19879 clauses 6–13 · EN 856 · ISO 6803 · ISO 1402 · ASTM B117 |
| Statement of conformity | PED 2014/68/EU, Annex I Chapter 3 | Double ferrule compression fittings, up to 2" |
| Design appraisal | DIN 3015 Parts 1, 2, 3 & 10 | Pipe clamps and assemblies |
Services for Data Centres
Take the whole package, or any part of it.
Literature for Data Centres
The brochures carrying the ratings, materials and configurations quoted above.
Download the certification pack
For your qualification and audit file - issued documents with body and validity date.
Send a technical enquiry
Consultative, not commercial - tell us the application and standard and an engineer replies.